4ton material or passenger construction elevator for Sale / Rated
Speed 0~33M/min / Standard Height 50M
Specifications of SC200/200 Construction Hoist Elevator
|Model||SC200/200 - Frequency (Middle speed)|
|Payload capacity||Up to 2 x 2,000 kg|
|Max. lifting height||150 m/300m (Increased lifting height on request.)|
|Cage width (internal)||1.3 m & 1.5 m|
|Cage length (internal)||3 m|
|Cage height (internal)||2.4 m|
|Motor control||Frequency controlled|
|Motor power||11 x 3 kw /15 x 2 kw|
|Safety device||Mechanical interlocking door system to guarantee the highest safety
|Power supply range||~380V±50Hz|
|Type of mast||650mm /800mm, Tubular steel with integrated rack|
|Length mast section||1.508 m|
|Weight mast section with 2 racks||158 kg|
|Main parameter||Unit||Type||Main parameter||Unit||Type|
|Load capacity||Kg||2000X2||Cage dimensions||m||3X1.3X2.4 3X1.5X2.4|
|Basic height||m||50||Section dimensions||mm||650x650x1508 800x800x1508|
|Lifting speed||m/min||33/60||Safety breaker type||SAJ3.0x1.2 SAJ4.0x1.2|
|Maximum lifting height||m||150/300||Operate pressure||v||~380±50Hz|
|Person capacity||12x2||Motor power||Kw||11x3/15x2|
Advantages of SC200/200 Frequency Convertible Construction Hoist Elevator
1.Energy saving, small startup current.
2.Adjustable speed, more convenient operation.
3.Starting and braking smoothly.
4.Reduce mechanical wear and extend the mechanical service life.
5.The running status of the construction hoist can be tracked from
the monitor panel.
6.When the electric system malfunctions in the operation process of
the construction hoist, it can be interchanged between normal power
frequency and convertible frequency by a little switch to ensure
the construction hoist work well. Without stopping the use of the
construction hoist, the malfunction can be solved to refresh the
dual functions of normal power frequency and convertible frequency
in enough time.
7.It is necessary to use the construction hoist with inverter in
the areas where the electricity is not stale.
Within the range of 10%~20% lower than rated power of 380V, the
construction hoist can work well with low malfunction rate.
Main Introduction about SC series Elevator
SC serialization of products Hoist is a Rack and Pinion. Building
lifter widely applies to such construction sites as industrial and
civil architecture, bridge, underground, large chimney, and ship
industry etc. It suits the vertical transport of materials and
people and also suits such different occasions as warehouses, high
It is installed and dismounted conveniently and can grow as high as
the building grows height. The lifter has such advantages as steady
property, safety, reliability, flexible carrying, and good
adaptability, improves working efficiency, and can reduce workers’
It is efficient and safety vertical transporting equipment for
Advantages of JinKui’s SC Series General Construction Hoist (SC200/200)
SC series general construction hoist has the advantage of direct
start, and simple structure.
Compared with the other construction hoist made by others, it has
the following advantages.
1.Optimized cage make it lighter and save energy.
2.More space and better lighting in the cage.
3.Perforated steel plate or aluminum plate makes the cage antirust.
4.Fence separated with the cage make the transportation easier.
5.The nylon wheel which is added to the cage door block reduces the
friction and the noise.